Vvkb Logo

Snowmobile Block Heater

Snowmobile Block Heater

If you are looking for a snowmobile block heater manufacturer, you are in the right place.

VVKB supplies different snowmobile engine heaters to help the snowmobile warm start.

It is a good market. Contact VVKB team and get for details.


Improve the efficiency of your snow machine with the VVKB Snowmobile Block Heater. It is designed with the end user in mind for optimal performance and low fuel consumption.

The VVKB Snowmobile Block Heater supplies rapid and constant heat that warms up the engine, preventing hectic and expensive cold starting. Even when the temperature drops below 0°C, this engine coolant heater for snowblower continuously and instantly transmits heats.

VVKB Snowmobile Block Heater quickly warms up the engine from the very start, eliminating possible engine wear, high CO2 emissions or high fuel consumption. Its aluminum casing and proper choice of material for other components guarantees a worry free performance.

Directly install the VVKB Snowmobile Block Heater to explore all possible open terrains and trails in snow or ice. It gives snow machine operator unlimited possibilities due to their small size that fit nearly all snowmobile.

They come in different capacities and power for all snowmobile engines.

Why VVKB Snowmobile Block Heater

Send Enquiry Now

Snowmobile Block Heater: A Helpful Guide for Importers



Snowing is a fascinating activity – whether as a recreational or sporting activity.

However, you can only enjoy it with the right machine.

So, what makes a snowmobile engine more efficient?

You need a block engine heater.

And in this guide, I will walk you through every aspect of the snowmobile block heater.

By the end of this guide, you should be able to buy a suitable snowmobile block heater.

What is a Snowmobile Block Heater?

Permit me to start with the basics.

snowmobile is an automotive machine just like the motorcycles and many others.

However, as its name suggests, for this, it’s driven on the ice or snow for either recreational or sporting purposes.

Either case, these activities are known as snow riding.

Now, let’s get back to the question.

A snowmobile heater is a gadget that provides maximum heating requirements to the snow machine.

A suitable one perfectly fits in the automotive machine’s engine compartments to operate rapidly and consistently.


The main aim of the block heater is to provide the much-needed heat that’s vital to maintain the operations of the engine.

The warmth is necessary to keep the fluidity of the engine oil before starting.

It enhances the smooth starting of the machine.

Additionally, the heater would lengthen the lifespan of the engine.


It helps in reducing the wear and tear of engine parts.

These heaters are available in the market at various designs and shapes.

Due to the advancement in manufacturing technology, some can efficiently warm the engines in a short duration of time.

Consequently, this would enhance elimination of risks that come along with cold starting the engine.

For more of the benefits and reasons why you need a snowmobile block heater, let’s proceed to the next section.

Why You Need a Snowmobile Heater?

You must be wondering why so.

Have you ever been caught up in the following situations while operating your snow machine?

  • Your automobile is refusing to a quick
  • The engine wears quite often.
  • Your machine produces excess thick and smoky emissions.
  • The fuel tank drains so quick than usual.

If you ever experienced these, then you need not to worry.

The good news is that a snowmobile engine heater is very crucial to your automobile.

Remember, the snow machine moves on snow or ice trails which have got shallow temperatures.

Let’s get to the primary reasons why you need a snowmobile heater.

automotive block heater
Snowmobile engine heater

1. Eliminates any chances of wear and tear due to frequent cold starts.

In the cold, snowy environment, the engine oil undergoes rapid changes.

Since oil is fluid, at freezing temperatures, the oil transforms into thicker and cloudy portions.

At this state, the engine would take a more prolonged period to start.

Why so?

The engine starters would undergo a strenuous process to start the engine coated with cloudy oil.

The process would mean, the production of some warmth to melt the oil and increase its fluidity to the optimum level.

That would surely take long and causes unnecessary anxiety.

Usually, the oil lubricates the moving engine parts when starting.

But now the fluidity property has dramatically declined.

Consequently, the lubrication of these parts is limited.

For this now, starting the engine would be hectic.

Unfortunately, the effects of inadequate lubrication are very adverse.

Imagine the kind of wear and tear that would result from parts rubbing against each other?

The pieces would peel off due to the excessive friction.

Moreover, mechanically, engines require some form of coherent expansion and contraction of parts.

This would help the engine parts to get elongated ideally for the fitting of the various components.

The advantage: no parts get broken down as opposed to when they could be cold.

Indeed cold starting isn’t advisable, and the block heater saves you the unnecessary stress from wear and tear.

2. Saves you fuel costs

Occasionally, most people try to avoid cold starting the engine by leaving at an idling state.

The reason is that idling state helps to warm up the engine fluids to the right temperatures necessary for starting the machine.

Well, that’s perfectly fine.

But the major challenge is towards the high fuel consumption which directly translates to increased fuel expenditure.

At this state, the fuel tank rapidly drains as a result of the increased fuel demand required.

Ideally, idling is unreasonably expensive.

With a block heater, no need to dig deep into your pockets to cater for extra fuel costs.

3. Decreases excess harmful emissions into the environment

Are you a victim of excess dark emissions from your machine?

This is as a result of improper operation of the engine under extremely freezing temperatures.

In order to solve this, block heaters would enable the engine to operate usually.

Normal operations don’t produce excessive emissions.

These exhaust gas come up from the high fuel consumption needed to start the engine.

Worse still, they incorporate dark, and half-burned fuel which in turn causes harmful pollution to the environment.

4. Increases the battery’s lifespan

In the cold, the battery performance dramatically declines.


The battery chemical reactions become unstable.

When cold starting, additional heat source would be required to ‘bring to life’ cold engines.

The only option for the warmth at this point would be the battery.

The wrong side is that it could get rapidly and instantly drained.

It’s unlikely that the starter battery can withstand such leading to its weakening and hence damage.

As you can realize block heater would eliminate this scenario in which the battery rapidly ‘dies’.

5. Maintains the Reliability of the engine

By reducing wear and tear and improving the battery’s lifespan, block heaters provide and ensures that the drivers are always dependable at your convenience.

Generally, the block heaters limit chances of engine breakdown during operation.

Ultimately, snowmobile block heater is a necessary device for efficient operation of your machine engines.

You only need to select a suitable heater for your machine.

So, what are the different types of snowmobile heaters available in the market?

We discuss that in the next segment.


Types of Snowmobile Block Heater in the Industry

There are various heaters out there in the market.

The only difference that stands out will depend upon your capability of choosing the right one that meets your specifications.


Types of Snowmobile engine heaters

It’s therefore prudent to set them right.

Afterward, you can buy one.

Only you need to buy from established manufacturers.

The types of snowmobile block heaters can be classified by:

· Models

Various manufacturers have got different brands and designs based on their specifications.

Right now low-quality goods have flooded the market.

For such you need to be more cautious.

As earlier mentioned, consult reputable manufacturers to have a wide range of selection from the brands they produce.

· Device power

The output power of these heaters is diverse.

Depending on their sizes and designs you will realize that their calibration in the range of 500W, 1000W, 1200W, etc.

Again, you only choose the one that can supply adequate power for your automobile’s engine’s needs.

· Rated voltage

Same as the rated power, the measured voltage also varies.

Most common snowmobile block heater voltages are 110 V, 120 V, 220 V, 240 V.

· Size and Dimensions

They also vary by the manufacturer’s design.

Nevertheless, most of them do range from 1kg to 2kg.


Main Parts of a Snowmobile Heater

Since this a state-of-the-art machine, it would be clear that it has got several parts and components.

These parts work together to achieve the purpose of the heater.

It’s worth noting that, these parts may vary from one gadget to another depending on the manufacturer.

Vvkb Engine Heater Titan-P1 installation drawing
Engine heater

I will, therefore, assist you to acknowledge the significant and shared parts of snowmobile heaters.

Let’s quickly get into that.

· Heat Exchanger

This is the central part of the heater that is responsible for heat production.

Here, the system works efficiently to deliver the appropriate heat that requires supply to the engine compartment of the snow machine.

It’s the efficiency of this section that determines how suitable a heater is.

The more it’s efficient, the faster and proper emission of the required heat.

Remember, the primary goal of the heater is to supply heat to the engine.

Usually, this part comprises the inner and outer segments.

Additionally, an appropriate sealing tool for the heat exchanger may be incorporated.

· Fan system

The fan design is essential for providing external fresh air to aid in the process of burning the fuel to produce heat.

The air is also necessary for cooling down the process.

The fan system comprises of other auxiliary parts such as:

  • The type of heater
  • The inlet for wind and air pipes for the combustion
  • Control unit together with electrical plugins.

However, these and other parts may be customized depending on the design of the heater.

· Fuel burner/ lamp

It is at this point that the fuel mixes with the air to burn down.

The fuel streams into the heating chamber via a valve.

Just after leaving the fuel storage chamber, its ignition occurs in the nozzles at the point where the air flows.

It’s at this point that the initial heating occurs.

The burner is hence a crucial part of the heater and needs thoughtful consideration.

Always be keen and definite on the kinds of the lamp in the snowmobile heater.

Inappropriate burners would reduce the reliability and may damage the heater.

· Automatic temperature sensor

This is a small but crucial part of the heater.

It uses the concept of electrical resistivity.

It detects the different adverse temperature within the snowmobile heater’s heat exchanger system.

This detected signal usually gets transmitted electronically to the control panel of the heater where the signal translation and processing takes place.

These signals are critical since they would determine the severity of operation of the heat production.

Meaning, the signs help to limit down the frequency of heating.

· Metering pumps

This system of pumps is responsible for transporting fuel from the storage tank to the heater.

Usually, the block heater will be designed to acquire diesel from the storage tank of the snow machine.

In this way, you shall save on fuel.

The fuel is predetermined by the metering process to ensure only the needed quantity gets relayed.

Afterward, the relay window gets shut off.

· Airtight screw

This bolt firmly attaches the engine heater in position.

Thus it ensures the heater doesn’t toggle about during operation.

Always make sure the rivet is tight and strength all the time.

· Temperature regulator

This is also a fundamental part. It merely works by ensuring the operational temperature doesn’t exceed a set limit point.

Its two way, that is, it prevents the heat from declining past a set minimum point.

On the other hand, the temperature need not go beyond a maximum measure.

It ensures adherence to the optimum temperature.

· Fire sensor

This is purely an added safety technique.

Occasionally, there might be fire outbreak in the engine.

Luckily, the sensor would timely detect that and hence limits any chances of fire.

· Exhaust pipe

This is a significant tunnel through which the exhaust gas emission occurs into the surrounding.

· Heater tubes

These are the various pipes in which the fuel and fluids flow through within the engine heater.

These ducts usually connect the corresponding parts of the heater such as the heat exchanger, burner and metering pumps etc.

I have to reiterate that these are some of the standard parts that you are likely to see in an engine heater.

To be well conversant with the heater parts, it’s wise to always request for the heater manual when making a purchase.

external block heater
VVKB engine heater

In this way, you shall read detailed information on the various components including their functions.

Having learned that, we can now shift our focus to an equally sensitive bit of the heater.

Have you ever wondered how a snowmobile block heater operates?

Interesting, right?

How a Snowmobile Block Heater Works

Most of these kinds of heaters are fuel has driven,i.e., they either use petrol, diesel or gasoline.

Subsequently, you don’t need to stress yourself for the sake of acquisition of external driving power.


You could merely share for it the snowmobile fuel from the central storage tank.

Although this only applies if the heater uses similar fuel to that of the snow machine.

Now for this, the heater burns down the fuel for production of heat required for warming the engine compartment.

The metering pump here draws the diesel or petrol direct to the burner.

At this location, air and fuel mix.

Once the achievement of the required mixture content, it’s stimulated to ignite thereby burning.

The combustion expels heat.

More severe burning takes place in the heat exchanger.

Afterward, the emitted heat gets transferred to the automobile engine.

The heaters do operate in a cyclonic process referred to as thermosiphon technique.

This process entails the implication of different densities of cold and warm air in heating.

It involves merely the technique in which the block heater initially heats the engine coolant through by convection process.

The coolant is brought about by the propelling action of the fan unit system.

The warm coolant escapes via the heating tubes and rises upwards straight into the snowmobile engine.

In turn, the warm coolant displaces the denser cold coolant which then gets transferred and flows into the heater combustion chamber by action of the fan.

The process goes on in this cyclic manner until the automobile engine gets sufficiently heated to a desired temperature.

There you go.

That’s the basic and simple process by which a heater works.

Due to the diversity in the market and technology, some heaters may work differently as opposed to this common algorithm.

The next concept is very critical, keep reading.

How to Install Block Heater on a Snowmobile

Have you been wondering about this?

Some believe it’s a complicated task while others do trust that professional experts in the field can only do it.

Block heater installation is nothing ambiguous.

However, the process may vary little depending on the engine design and the type of the heater.

Believe it; the block heater should get appropriately fixed within a short duration.

You shall need some other auxiliary tools to take on the task.

Some of these tools required for the installation process include:

I. suitable screwdriver

II. Tape measure

III. Drain pan

IV. Ratchets

V. Torque wrench

VI. Motor oil

VII. Felt tip pen

Let’s get straight into the conventional process to aid you.

1) First Lever Up your Snowmobile

Once you have selected the right block heater for your device, it’s time to get down to work.

The right one means the one that has reached the correct power output which will serve you dearly.

Also, it should be compatible with the machine.

Assuming all these above factors are guaranteed, you are good to go.

Since we are dealing with a small automobile here, it’s much easier to lift it.

Jack up the front part and remove the engine cover.

2) Empty the Engine

Initially unlock the radiator clips.

These are the chips that do always hold the radiator cover in a tight position.

After that, also remove the screws which hold the radiator mounting brackets.

Having done that, now place a pan beneath the engine.

Pull off the drain plug.

You need to be cautious and only eject the specific one.

Mostly, the location of the drain plug is at the rear section of the engine.

At this point, the fluids should now begin flowing.

To increase the rate of drainage, detach the radiator cap.

3) Connect the Heater

You need to fix the section linking the power cords and heating rods.

Note that, the cords have got two coloring’s, i.e. black and red.

Now drop the red end of the ties onto the engine slot.

Adequately, lubricate both the rod and hole using grease.

This should be done till the tip of the metal clip but not further up above the clip.

Place the metal clip facing the back end of the car.

Insert the rod into the hole.

Depending on the conditions at the time, fixing may cause some little challenge due to trapped air.

To solve this, continuously apply grease.

Then reinsert the rod.

When done correctly, it produces a little snap sound.

This indicates that the heater is actually in its position.

4) Route the Power Cord

It’s time now to plug the cord into the rods.

Once correctly fixed, secure them with wires.

Again, restraint cords from reaching the engine manifold.

Connect the cables via the engine compartments.

The wire exit should be the front grill.

During the installation process try as much as possible not to toggle any pipes or parts.

Note that it isn’t advisable after first ties to leave slacks behind.

That’s it.

Once you have completed all these simple steps, your snowmobile should be entirely operational.

Now you can acquire all the benefits that come as a result of the block heater.

I hope you are not lagging.

Apart from this technique, you may refer to your manufacturer’s snowmobile block heater’s installation procedure contained in the product manual.

The process might be different though it employs a similar technique.

Now, I will introduce and refer you to a reliable manufacturer for all your snowmobile block heater.


VVKB Snowmobile Block Heater – Your Trusted Snowmobile Block Heater Manufacturer

With all these information, I trust that you are now ready to work with a block heater.

Before rushing out there, you need to know that there are numerous manufacturers.

The only challenge is to contact the right and genuine builders.

VVKB is a specialist block heaters manufacturer with vast technical experience of about ten years in the industry.

For sometime now, VVKB is the outstanding producer of engine block heaters globally.

Are you an importer, dealer or a buyer we cater for all your needs.

We specialize in the manufacture of the following products:

gas car heater

Besides, VVKB is the trusted leading producer by customers worldwide.

What makes our heaters unique?

I. All the VVKB heaters have passed all the quality and safety measures certified by CE, TUV, ROHS, FCC.

II. We supply and export heaters globally.

III. You get assured of full 24/7 support from our customer and technical staff.

IV. Low MOQ on absolutely any engine heater.

V. Complete after sale services.

VI. With VVKB you are assured of prompt and steady heating.

Whatever the kind of engine heater you want, partner with the best manufacturer in the market. Conclusion

Congratulations on reaching the end of this guide.

You now realize that snowmobile block heater is a must-have device if you want to ride without limits.

With this device,we guarantee you a long-lasting engine.

Your fuel prices are also substantially cut down, together with limited air pollution.

Most importantly, remember that you only need to pick the right block heater which caters for all your needs.

Are you able to buy the perfect snowmobile heater?

Yes, you should now with all this information.

Incase you still have got some reservations,please contact VVKB.

At VVKB, professionally designed and manufactured heaters are available to suit your needs.

Acquire yours at unbeatable rates and prices.

Contact Us Now

Request A Quick Quote Now